Transmitter CR4S.V2:

Description of the channels (the transmitter has 4 channels which are assigned as follows):

CH1: Steering wheel

CH2: Throttle lever (Trigger)

CH3: 3-position toggle switch

CH4: Push button

 Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.

 Trimming (TRIM): Adjustment of the straight run and throttle neutral position.

 Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.

 Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).

 Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.

Distance: >150m

Batteries (not included): 4*AA 1.5 - 6V DC

Low V Warning:

Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)

Charging interface: No

Antenna type: Single antenne

Temperature range: -10°C - +60°C

Dimension (L/W/H): 150*100*210 mm 

Weight: ca. 130 g

Includes a short aerial tube when sold as part of a transmitter/receiver system

Receiver R4WP-V2 Micro:

 Channels: 4

 Antenna type: external single antenna

 Waterproof: Yes 

Power: 3.5-8.4V

 Failsafe: Yes (in connection with radio)

 Temperature range: -10°C - +60°C

 Weight: 5 g

 Size: 30.2*18.0*13.0 mm

 May need binding on receipt, instructions are included!

Not included: 

Box, servos, battery box or on/off switch for in the car