Tamiya are currently including this ESC in most all of their 1:10 car kits such as the Hornet, Grasshopper, Sand Scorcher & Monster Beetle.

Specification:

Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC)

Item no. 542408

The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more.

The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud!

If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.
 

Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about!

Features:

• 2S or 3S LiPo with voltage protection
• 5-9 cell NiMH or NiCd
• Suitable for all types of 1/10th scale vehicles

Specification:

• Forward Continuous Current: 60A
• Forward Burst Current: 360A
• Reverse Continuous Current: 230A
• Reverse Burst Current: 180A
• Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
• Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat
• Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v
• Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v
• Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm
• PWM Frequency: 1 KHz
• BEC: 6V/3A
• Dimensions: 36.5x32x18mm
• Weight: 39g

Supplied with double sided tape for the ESC and the on/off switch (shown in red in the picture), you can secure the switch to a suitable position on your chassis. 

Upon receipt you will need to plug the small jumper plugs into the ESC in the correct positions to suit your battery type (Lipo/NiMH) & use (F/B/R, F/B or F/R) - please refer to last picture