New Tamiya TBLE-02S Brushed/Brushless ESC Replace TEU-101/104/105-BK
Brand new Tamiya TBLE-02S electronic speed controller with instructions, suitable for use with both brushed and brushless 540 motors (please see full spec below). For use with NiMh batteries, not suitable for use with LiPo/LiFe batteries. The orange motor wire is not used when running with a brushed motor. ESC is supplied as shown (plus full instructions), please note that a sensor wire is not included, the ESC can be used without one.
This ESC is designed for use with the Tamiya brushless motor 01 (sensored) series and also the brushed Tamiya Sport Tuned Motor and other Tamiya brushed motors above 25 turns. When using servos with a current exceeding 1.5A the BEC circuit may be shut down. Never run a brushed motor with the ESC in brushless mode and vice versa as this may damage the ESC and will void any warranty.
Specification:
ESC: Forward / Brake / Reverse
Max continuous current: 60A
Input Voltage: 6.6-7.2v
Output: Forward - 100% Reverse - 50%
Dimensions: 45 x 34 x 25mm
Weight: 50.8g
Receiver output voltage 6v/1.5A
Please note:
Because the ESC is supplied from Tamiya set up for either brushed or brushless mode the motor mode set up is the first part of the instructions that needs to be followed even though it is not the first item in the instructions. The motor wires should not be connected during the set up process!
This esc is not waterproof and is only suitable for use in r/c cars. Please make sure all connections are properly connected prior to use. Never run a brushed motor with the ESC in brushless mode and vice versa as this may damage the ESC and will void any warranty. Continuous running may loosen/overheat battery connector causing possible damage. Battery, Motor & ESC can become extremely hot during use which could cause burns if touched. Please read and fully understand instructions prior to use as damage caused by improper use will void any warranty.
This ESC is designed for use with the Tamiya brushless motor 01 (sensored) series and also the brushed Tamiya Sport Tuned Motor and other Tamiya brushed motors above 25 turns. When using servos with a current exceeding 1.5A the BEC circuit may be shut down. Never run a brushed motor with the ESC in brushless mode and vice versa as this may damage the ESC and will void any warranty.
Specification:
ESC: Forward / Brake / Reverse
Max continuous current: 60A
Input Voltage: 6.6-7.2v
Output: Forward - 100% Reverse - 50%
Dimensions: 45 x 34 x 25mm
Weight: 50.8g
Receiver output voltage 6v/1.5A
Please note:
Because the ESC is supplied from Tamiya set up for either brushed or brushless mode the motor mode set up is the first part of the instructions that needs to be followed even though it is not the first item in the instructions. The motor wires should not be connected during the set up process!
This esc is not waterproof and is only suitable for use in r/c cars. Please make sure all connections are properly connected prior to use. Never run a brushed motor with the ESC in brushless mode and vice versa as this may damage the ESC and will void any warranty. Continuous running may loosen/overheat battery connector causing possible damage. Battery, Motor & ESC can become extremely hot during use which could cause burns if touched. Please read and fully understand instructions prior to use as damage caused by improper use will void any warranty.
Part No: tamiya- 45057
Price Including VAT: £35.99
Price Excluding VAT: £29.99