New dual spring full aluminium (not plastic eyelets) high quality aluminium oil damper shock set from JK-RC.

In a dual Spring system you have two springs on your shock that are separated by a spring divider. The spring divider is designed to keep the springs in line as well as act as a bushing for the shock and keep the springs from rubbing on the shock body.

Supplied pre-built & pre-filled with oil, ready to fit & use, these are a few mm's longer than the original shocks so just compress slightly to fit.

You can re-use all the existing fixings with the exception of the brass tubes. Two small spacers are included with the shocks for to go between the existing red spacer and the car on the front upper mounting points, just to prevent the spring from touching the shock mount.

Note: The edge of the spring holder on the bottom of the front shock just touches the metal bracket that it's mounted to when it's fully extended. Over time this may leave a small mark on the shocks' spring holder but due to where it's positioned it will be all but impossible to see it.  

Supplied as shown in the first (main) picture. Please allow for the unlikely possibility of 1/ minor difference between individual shocks (mainly the shade of the main colour) 2/ light surface marks or oil residue from the manufacturing/filling process.