*2 Receivers* New 4-Channel Absima 2.4ghz R/C Car Wheel Radio Transmitter / Receiver System
Part No: Absima-CR4S.V2-2RX
Transmitter CR4S.V2:
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
Distance: >150m
Batteries (not included): 4*AA 1.5 - 6V DC
Low V Warning:
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperature range: -10°C - +60°C
Dimension (L/W/H): 150*100*210 mm
Weight: ca. 130 g
Includes a short aerial tube when sold as part of a transmitter/receiver system
Receiver R4WP-V2 Micro:
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperature range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
May need binding on receipt, instructions are included!
Not included:
Box, servos, battery box or on/off switch for in the car