UK ONLY

New 7.2v 1100mah drive battery with 9v 500mah trickle charger with Tamiya Mini-connectors as shown:

Approximate battery dimensions: 100 x 32 x 18mm (excluding wires).

Tamiya mini-connector size is approx: 22x10x5mm (not to be confused with the larger standard Tamiya connectors which are 26x14x7mm)

Please use the details above to make sure this is the correct battery for your needs.

Brand new NiMH batteries can take approximately six full charges & discharges before they reach peak performance.

Fitted with UK 3-Pin mains plug & Tamiya mini-connectors as shown.

IMPORTANT - PLEASE NOTE:

Voltage outputs on chargers are usually slightly higher than the battery they are charging in order to charge the battery to its full capacity, therefore the output voltage on the charger itself will usually not match the battery voltage it is designed to charge - this is normal. This charger does not come with instructions.
This charger does not stop automatically, you need to disconnect your battery after the appropriate charge time (divide the battery capacity by the charger output to calculate the charge time i.e. an 1100mah battery will take just over 2hrs to charge from completely flat).

Never leave a battery charging unattended.